REXI silver mirror glass price is higher because the stability of metallic silver is much higher than that of other commonly used metals, so it has excellent rust and corrosion resistance and is suitable for wet environments such as bathrooms.
The process by China silver mirror suppliers is a chemical replacement reaction, silver nitrate becomes silver, and copper sulfate becomes copper.
After cutting the glass according to the specifications, China mirror glass manufacturers first flush the front and back surfaces with tap water, and then apply the iron powder on the side to be coated. After drying, wipe off the iron powder and wash it with water. Then use a small amount of stannous chloride solution to scrub the surface of the glass to be plated. After washing, rinse the residual stannous chloride with water. Finally rinse it with clean water (preferably distilled water).
Place the cleaned glass on a flat wooden bar, and put silver solution and the reducing solution on it, keep the liquid does not flow off. The doze is about 2 liters per square meter. Wait until it gradually reflects a silver layer on it, drain the excess liquid, rinse with water, and pour gelatin onto it to dry, then apply a layer of iron red primer or other anti-rust paint to the mirror.
In China silver mirror glass factory the producing line has a total length of 150 meters. This line is also used in the production of non-copper mirror. Instead of copper plating, a special solution is added after silver plating. The non-copper mirror is also called a green mirror and it has the best corrosion resistance.