REXI frameless glass doors are almost completely transparent or semi-transparent, so they have good daylighting and can be suitable for any constructional combination. Generally it appears in shopping malls, hotels, offices and other places.
To China frameless glass manufactures, the installation shall be carried out after the construction of other processes in the room is basically completed. The fixed glass partition and the movable door leaf must be uniformly placed on the line. According to the requirements of the design drawing, the partition line and the position line of the glass door should be released to determine the position of the door frame and accurately measure the elevation of the ground and the height of the door frame.
The width of the installation glass partition wall and the limit slot at the top of the door should be greater than the glass thickness of 2 to 4 mm in Chinese factory, and the depth of the groove is between 20 to 30 mm for the purpose of glue injection. Frameless glass doors price depends on the difficulty of installation. The method can lead out two metal decorative plate edges from the centerline of the bullet, and then install the limit slot at the top of the door frame according to the edge line. The wood plate in the slot is adjusted to the depth of the slot.
Press the centerline of the bullet to erect the door frame and then use the plywood to determine the frame size and position of the door frame (note that the size of the decorative surface should be reduced). Finally, the outer surface of the metal decorative surface is covered by China frameless glass doors suppliers, and the front surface seams of the trim are to be placed in the middle position of both sides of the mounted glass. The seam location must be accurate and vertical.